Your computer saves the network’s profile and settings each time you connect to a wireless network. A secure key is shared using a secure channel before it is needed during the connection-establishing stage between two parties. The pre-shared key is the name for this secured key (PSK). This post will discuss a typical issue that appears after updating the router password and PSK.
This error states, “Incorrect PSK provided for network SSID,” which can occasionally cause panic given that you might need internet connectivity immediately.
How To Fix: Incorrect PSK Provided For Network SSID
Let’s explore the possible cause of this error message first.
What Results in Incorrect PSK Provided for Network SSID Error?
Your PC may be unable to match the shared key (PSK) of your router if you unintentionally changed it while changing your Wi-Fi password, and it will begin displaying an “Incorrect PSK Provided for Network SSID Error” notice.
This issue can potentially be brought on by a corrupt network driver. Or the same difficulty could be caused by using the incorrect Wi-Fi password, albeit that is not always the case.
Your router may be using the default Windows adapter, which is another scenario that could happen. In this situation, the router may be treated as a WPA2 (Wi-Fi Protected Access II) network even when it is actually utilising WEP (Wired Equivalent Privacy) encryption, and vice versa. Even if you are using the right password, the authentication will fail if this is the case.
This post has looked into and compiled a few methods that you can try to fix the “Incorrect PSK Provided for Network SSID” problem in light of these potential causes.
You don’t need to panic because the causes are obvious; instead, you should do the steps listed below. We truly hope that this manual will assist you in solving your issue.
Remember to double-check that you are not connecting with the wrong password before attempting any of the subsequent steps.
7 Ways to fix the network SSID problem caused by incorrect PSK
The 7 fixes listed below can all be used to resolve this issue. You might not have to give them all a go, though. All you have to do is adhere to the established hierarchy.
1. Start the modem and router again.
Restarting your modem and router should be your first step. Although it is not a common situation, it is possible that they could become overheated and result in an error because of the lengthy run-time.
Turning off the modem and router, waiting a few minutes for it to cool off, and then turning them back on are all that are required to complete the debugging procedure in this instance.
Turning off should presumably resolve the problem by refreshing the internet connection. Continue to the following method if this approach is ineffective.
2. Upgrade your router’s network driver
As previously indicated, if Windows is utilising the default adapter, it may cause an incompatibility situation by treating the router’s WPA2 as if it were actually using WEP encryption.
Despite the user entering the correct password, this may result in an authentication problem.
Downloading and manually installing the router’s specialised driver on your PC would solve this specific problem. By doing this, the router will be compelled to recognise the appropriate encryption method.
Visit the official website and search for the driver for that specific model to get the router driver. Please make sure you are downloading the most recent driver update.
The latest router driver update should be available if you choose to use the Windows driver update option (connect with a different router to gain an internet connection).
To upgrade the router driver, go to the instructions below:
How to upgrade the router drivers in Windows?
- The run dialogue box will appear when you press Windows + R. Next, type devmgmt.msc and to access the driver management window, hit enter.
- Expand the network adaptor drop-down option in the device manager, then choose + right-click on your network driver adapter.
- Click the button labelled “Search automatically for updated driver software” on the next pop-up window, and then wait while it looks for the most recent driver. Install the update on your PC if it discovers one.
- Restart your computer after installation to see whether this fixed the issue! If not, move on to the next action.
3. Eliminate any current wireless network profiles.
Your computer will save the network settings and profile when it joins a wireless network. Even after changing the password, the profile and settings can occasionally remain the same.
Incorrect PSK given for network SSID error may result from this. You should try deleting the current wireless network profile from your computer to see if that fixes the issue. To remove the network profile from the network manager, follow the instructions below.
- In the notification box, right-click the network symbol and choose Internet and Network Settings.
- Now select the Wi-Fi option from the left side panel, and then select Manage Known Networks.
- The list will include every network that has ever been connected.
- Select your desired network and then click the forget button. Your chosen network profile will be removed from your device.
- Now try connecting to the network once more to see if it fixes the problem. You should move on to the next method if you are still experiencing the issue.
4. Manually connect to a wireless network
If you are still receiving the wrong PSK given for network SSID problem after uninstalling the wireless network profile from your PC, you could try manually connecting to the wireless network and creating a new network profile.
To do that, go through these steps sequentially:
How can you connect to a wireless network manually?
- The run dialogue box will appear when you press Windows + R.
- After that, click Ok after entering control in the run dialogue box.
- By clicking on the network and sharing centre after picking a little icon on the control panel, you may quickly see all the available options.
- The next step is to select the option to “put up a new connection or network.”
- Next, select the option to manually connect to a wireless network.
- Add the name and password for your wireless network in the following window. Next, you must set the security type to WPA2-Personal.
- Finally, in order to connect to the wireless network, you must choose to use the existing network option. Try to open a webpage if the connection is created successfully to determine whether the problem has been resolved.
You should try connecting to the current network profile using the command prompt if the manual connection does not resolve the problem.
5. Connect to an existing network profile by using the Elevated command prompt.
Even though your problem ought to be resolved by now, there’s a potential that the Network SSID error’s incorrect PSK is still in place.
When no other approaches appeared to be working, some customers have reported that connecting to the existing network profile using the Elevated command prompt was successful.
The following would be the procedure for this approach:
- Open the run window, then enter cmd. Additionally, to open the elevated command prompt, press Control + Shift + Enter. On the user account control (UAC) prompt, select yes.
- To acquire a list of all wireless network profiles, type the command below:
|netsh wlan show profiles|
- Type the following command, followed by the enter key, after locating the wireless network profile you wish to connect to.
|netsh wlan connect name= “network profile name”|
Keep in mind that you must fill in the placeholder with your actual network profile name.
6. Update Windows
It could be challenging for an outdated operating system to handle the most recent drivers and software updates. This may be a legitimate explanation for why connecting to a router results in an incorrect PSK error.
Try updating Windows if it’s the outdated version that’s causing the issue. It’s really easy to update the windows; just work your way down the list.
- Enter the command window while logged in as the administrator.
- In the command prompt, enter sfc/scannow.
- Sfc /scannow will check all of your computer’s crucial system files, including Windows DLL files. If any of these protected files have issues, it will replace them.
Verify that the Incorrect PSK Provided for Network SSID is repaired after the full upgrade!
7. Scan the files in your operating system
You could try to scan those files with Windows Defender to see if you can detect any infected files that are stopping you from connecting to the internet network since it is possible that your operating system files are contaminated with viruses or malware.
Infected files must be removed as soon as possible if you discover any to restore the network.
You can either use Windows Defender’s normal scanning method or the SFC command to scan the operating system files. Use the instructions below to run a fast scan on your computer.
- Launch the command window while logged in as the administrator.
- In the command prompt, enter sfc/scannow.
- Sfc /scannow will check all of your computer’s crucial system files, including Windows DLL files. It will replace any of these protected files that have issues if they are discovered.
On a Windows computer, network problems frequently occur. After a few setting changes, a system restart, or a modem restart, the majority of them settle down. However, problems like using the wrong PSK could cause users to worry.
We hope that using these techniques will enable you to solve the issue and resume enjoying internet connectivity.